Billy IKEA Bookshelf invisible LED-holder
Summary
Hello,
I have designed a strip to hide LEDs on the Billy bookshelf.
You have to be careful: the shelves that you can position yourself are slightly thicker than the 3 shelves that are fixed.
This design is intended for the shelves.
if you want to mount the bars on the fixed boards, you have to shorten them by 0.1 mm in the y direction - otherwise they are not fixed and will slip a little, but still hold.
i have left some space in the x direction so that you can glue the strip to the right edge. if you want to use the full length of the boards, you have to stretch 0.4 mm in the x direction.
my bambu fits 256mm wide - that's why i had to print 3 of them for a shelf. you will probably have to adjust the length to your own board and print several pieces.
if you have any further questions, please feel free to contact me. otherwise, happy printing :)
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu X1C
- Rafts:No
- Supports:No
- Infill:10%
- Filament brand:
Overture
- Filament color:
white
- Filament material:
PLA/PETG
Tags
最新T站
-
F1 race boat fixed files2024-05-08
-
MBX5 Battery and ESC Tray2024-05-08
-
Wire Frame - Airless Heart2024-05-08
-
Double Chompy (blackout curtain clip)2024-05-08