Differential for Chasis 1/10 Adaptable - DKS-Basic

2024-05-08 09:43:15

本站旨在为打开T站有困难的用户，提供快速的检索服务，本站并不储存T站的模型资源，所以最终的模型下载要去到T站。

Summary

This is a remix from the Open RC Differential form tahustvedt to be used on the DukeDoks RC chasis
https://www.thingiverse.com/thing:2361718
https://www.thingiverse.com/thing:4892947
All the pieces that you need to prin are here, you need a new:
Shaft
Weel
Differential(replaces the gear)
A new nut for the wheel

You will need 3 more ball bearings, the same ones that you used on the front wheel, two for the wheel and one for the main gear of the Differential.
For the small gears of the Differential, use a piece of filament, check the original Differential for guide (https://www.thingiverse.com/thing:2361718)
There are two nuts to print, one easy to print, that is the origial frrm the open rc diff, and one with the same pattern from dukedoks, but it will require suport to print. Appart from that, the only thing that needs support is the wheel, that should be printed with the gear on top.
I also include a wheel to use bike inner tube, it has better grip than one made with TPU
Just let me know if you have any doubts